Ferraz Shawmut GPM-A series Panel Mount Fuse Holders will accommodate 5mm x 20mm fuses; most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 10A. …more

Ferraz Shawmut GPM-G series Panel Mount Fuse Holders will accommodate 1” x 1-1/4” 3AG fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 10A to 15A. …more

Ferraz Shawmut’s SHR fuse holder has an integral clip for panel mounting to meet this requirement. The holder fits into a standard 7/8” knock-out or keyhole punch that provides anti-rotation. The SHR is available in a single or double wire version. The single wire version (SHR-1) allows insertion of #18 AWG ballast leads directly into the holder. …more

Bayonet Knob In-Line Fuseholders for FSFE fuses. Used at 32V or less with fuses rated up to 20A when proper spring for fuse size is installed. …more

In-Line Fuseholder for 2AG and 5 x 20mm fuses. Max. current rating for 2AG fuses - 5A @ 32V Max. current rating for 5x20mm fuses - 10A @ 32V …more

Twist-Lock In-Line Fuseholders for FSFE fuses. Used at 32V or less with fuses rated up to 20A when proper spring for fuse size is installed. …more

Universal In-Line Fuseholder supplied with 15" loop of #14AWGT red vinyl insulated wire frame and three springs in different lenghts to accomodate FSFE size fuse …more